|
|
|
This 30-in.-tall version of the stacking sawhorse featured in the July/August 2007 HANDY (see p. 16) requires the same construction steps as the 16-in.-tall shorties. The bevels and miters are all 15 degrees. We substituted a 2x6 for the top board on this model, and we added a bottom tray to hold materials. The four lower gussets that support the tray make this sawhorse incredibly stable.  | Materials/Shopping List |  |
| | | | 
| Materials List | Shopping List | Tall stacking* sawhorses (1 pair)
A 2 Tops 1-1/2 x 5-1/4 x 36 in.
B 8 Legs 3/4 x 3-1/2 x 33-1/4 in.
C 8 Top gussets 3/4 x 3-1/2 x 8-7/8 in.
D 8 Bottom gussets 3/4 x 3-1/2 x 18-5/8 in.
E 2 Shelves 3/4 x 12-1/2 x 36 in.
F 4 Shelf edges 3/4 x 1-1/2 x 36 in.
(*Note: If you add the shelf, the sawhorses will not stack.) | 1x4 x 8-ft. boards (6)
2x6 x 8-ft. board (1)
1/2 x 48 x 48-in. plywood
2-in. deck screws 
|
|
|  | |  |
|
|
| Handy Video: Workshop Workhorses | |
| |
|
|